Soda 326
Equipment
| Monitor |
75″ TV monitor
|
|---|
Scheduling
| Schedule |
|---|
To schedule the room, go on your calendar on bConnected with your Calnet ID, and add “Soda-326 Recording Studio Cap:10” to the event, find a time that it is available to make the reservation.
After receiving a confirmation email, check out a key from the CS front office. Return key to office when done.
Back to top
Instructions
It is strongly recommended that you familiarize yourself with the room equipment and controls before your presentation.
 Pixie |
Press the “ON” button on the AV controller mounted on the wall in the room to turn on the projector, the indicator on the projector should turn to green. Wait a few seconds, a blue screen will first appear. If your image doesn’t come up afterwards, press the “COMP” button to change source on the projector. Toggling the “COMP” button to switch to laptop. | ||
| Laptop connections: | To display a laptop, connect to the VGA or HDMI cable in the room, common dongles available such as HDMI/VGA to USB-C/display port are attached to the cables. Toggle the “COMP” button on the AV controller if the projector did not pick up the signal automatically. | ||
|---|---|---|---|
| Done | Please turn projector off and put cables back nicely before leaving. Thank you. | ||
Troubleshooting
- In Soda Hall, projector does not seem to have power, please check that the wall switch next to the door is in the “on” position.
- Image does not show up after changing source on projector: try to toggle screen option on laptop to either mirror image or display extended.
- Image size does not show up correctly: try changing the resolution display on your laptop to match that of the projector.
- In PowerPoint, on Mac, can use Command F1 to switch between screens
- M-F 10-5, for any help on equipment or cable problems, please call helpdesk 642-7777 or email to esg@eecs.berkeley.edu